Costway GT3665DE Manual Del Usuario página 35

*) The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation between
emission and immission levels, this cannot be used to infer whether
additional safety measures are necessary or not. Factors which affect the
current immission levels at the workplace, include the type of room,
other sources of noise, e. g. the number of machines operating and other
processes taking place in the vicinity. Permitted workplace values can
differ from country to country. This information is designed to help the
user to better assess the dangers and risks.
**) The specified vibration emission value was measured in accordance
with a normed test procedure and can be used in order to compare one
tool with another. The specified vibration emission value can also be used
for an intr Oductory evaluation of the exposure. The vibration emission
value may fluctuate from the specified value during actual use of the
power tool. These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method of
reducing the vibration load is, for example, limiting the length of time you
work with the tool. All parts of the operating cycle must be taken into
account for this purpose (for example, also including times in which the
power tool is switched off and times in which it is switched on, but is
running without load).
Appropriate chain oil
NOTICE!
Risk of damage to the device!
Under no circumstances should you use old oil to grease
the saw chain! This can cause damage to the oil pump,
saw rail and chain!
Use only special saw chain oils with good adhesion properties. Since the
saw chain oil can penetrate the environment during operation, biologi-
cally-degradable special vegetable-based saw chain oils should be used.
35