Chauvet Professional MAVERICK MK2 PROFILE Manual De Usuario página 49

Operation
BLADE 2-1
1. Use <UP> or <DOWN> to select BLADE 2-1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
BLADE 2-2
1. Use <UP> or <DOWN> to select BLADE 2-2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
BLADE 3-1
1. Use <UP> or <DOWN> to select BLADE 3-1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
BLADE 3-2
1. Use <UP> or <DOWN> to select BLADE 3-2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
BLADE 4-1
1. Use <UP> or <DOWN> to select BLADE 4-1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
BLADE 4-2
1. Use <UP> or <DOWN> to select BLADE 4-2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
BLADE ROTATE
1. Use <UP> or <DOWN> to select BLADE ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
DIMMER 1
1. Use <UP> or <DOWN> to select DIMMER 1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
DIMMER 2
1. Use <UP> or <DOWN> to select DIMMER 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
MAC Address
To adjust the fourth, fifth, or sixth digit of the MAC address, do the following:
1. Use <UP> or <DOWN> to select MAC4, MAC5, or MAC6.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the value, from 000–255.
4. Press <ENTER>.
Maverick MK2 Profile User Manual Rev. 3 Page 34 of 209