Descargar Imprimir esta página

Briggs & Stratton 020223 Manual Del Propietário página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

How To Use Adjustable Nozzle
You now should know how to START your pressure
washer and how to STOP it.The information in this
section will tell you how to adjust the spray pattern and to
apply detergent or other cleaning chemicals.
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER adjust spray pattern when spraying.
• NEVER put hands in front of nozzle to adjust spray pattern.
1.
Slide nozzle forward to adjust spray to low pressure
mode (Figure 11). Slide nozzle backward to achieve
high pressure.
Figure 11 — Adjusting Nozzle for Pressure
Slide nozzle backward
for High Pressure
Mode
BSPP 2400 PSI Pressure Washer
Slide nozzle forward for low
pressure mode and
detergent application
2.
Point nozzle towards a firm surface and press trigger
to test spray pattern (Figure 12).
Figure 12 — Testing the Spray Pattern
3.
Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure 13).
Figure 13 — Adjusting the Nozzle for Spray Pattern
Rotate nozzle
counterclockwise for fan
spray pattern
4.
For most effective cleaning, keep spray nozzle between
8 to 24 inches away from cleaning surface.
5.
If spray nozzle is held too close to surface, especially
using high pressure mode, damage to surface may
occur.
6.
DO NOT get closer than 6 inches when cleaning tires.
9
Rotate nozzle clockwise
for narrow spray pattern

Publicidad

loading