Publicidad
Idiomas disponibles
Idiomas disponibles
1. PARTS AND COMPONENTS
Fig. 1
1.
Drain outlet
2. Main body
3. Control panel
4. Telescopic tube
5. Hanger
6. Ironing board
7.
Steam iron head
8. Steamer
9. Telescopic tube fastening
10. Water tank level gauge
11. Base
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Product assembly
1.
Assembly and disassembly of the telescopic tubes
Assembly: remove the telescopic tubes from the box. Extend the tubes to the desired height;
then, insert them into the holes in the main body until they snap into position.
Fig. 2
Disassembly: designed with a concealed locking mechanism to remove the vertical tubes,
first adjust them to their minimum height, this will open the lock and allow you to remove the
tubes easily.
IIRONHERO 2000 VERTICAL STATION
ENGLISH
37
Publicidad
