Comet PTO RW Manual De Uso Y Mantenimiento página 26

(1) Equivalent oils:
U.T.T.O.
(Universal Tractor Trasmission Oil)
Massey-Ferguson M-1135
Mobil Mobilfluid 422
2.1 I
dentIfIcatIon
Please also refer to figures 1, 2, 3 to 5, which are located at the start of these operating and main-
tenance instructions.
1 Pump with adjustment valve
2 Step up gear unit
3 Protective housing for cardan
4 Hook for safety chain
5 Water inlet filter
6 Filter cartridge
7 Filter cap
8 Water inlet hose support
9 Pressure gauge
10 Pressure adjustment knob
11 Water outlet coupling
12 Quick fit connector for high-pressure hose
13 High pressure hose
14 Cleaner gun
15 Lance knob
16 Lance hose
17 Nozzle support head
18 Support for accessories
2.2 s d
afety evIces
This water cleaner is provided with the following safety devices:
a) Pressure limit/adjustment valve
When this valve has been correctly set by the Manufacturer, it enables adjustment of the
operat-ing pressure (using the knob (10) and the pumped fluid is able to return to the pump's
suction unit, thus preventing the creation of dangerous levels of pressure when the cleaner
gun is stopped or should pressure be set that is above allowed levels.
fi«
warNING
• The pressure limiting / adjustment valve is calibrated by the Manufacturer.
Never try altering the calibration of the pressure limiting / adjustment valve: this can only
be changed using the knob provided (10) on versions offering this option.
b) Safety stop on cleaner gun lever
This is a safety catch (25) which, lets you lock the lever (24) closed on the cleaner gun (14) to
prevent the possibility of it being started by accident (Fig. 2, pos. S).
2.3 I u
ntended se
fi«
warNING
• This high pressure cleaner is intended exclusively for:
- cleaning vehicles, machinery, buildings, tools etc with cold water;
Ford M2C - 134 B/C
c
of omponents
API GL-4
Ford M2C - 86 B
19 Pins for bottom tension rods on the three-point cou-
pling
20 Plugs for bottom tension rod pins on the three-point
coupling
21 Pin for top tension rod on the three-point coupling
22 Split pin for top tension rod pin on the three-point
coupling
23 Chassis
24 Cleaner gun lever
25 Safety catch on cleaner gun lever
26 Oil level indicators
27 Warning labels
28 Identification label
29 Nozzle cleaning pin
30 Spacer
31 Oil caps without breather vent (red)
32 Oil cap with breather vent and dipstick for pump
(red black)
33 Oil cap with breather vent and dipstick for step up
gear unit (yellow)
EN - 26
John Deere J20A
Esso Torque Fluid 62
Shell Donax TD