Publicidad
Idiomas disponibles
Idiomas disponibles
START UP GUIDE
IMPORTANT:
•
Properly dispose of/recycle all packing material.
•
Read this entire User Manual. You will find important safety information
and useful operating tips.
HOW YOUR DISHWASHER CLEANS
Your dishwasher cleans by spraying a mixture of hot water and detergent
through the spray arms against soiled surfaces.
The dishwasher fills with water covering the filter area. Water is then
pumped through the multiple filters and spray arms. Soil particles are
separated from the water and go down the drain as the water is pumped
out and replaced with clean water.
The number of water fills will vary depending on the cycle selected.
BEFORE USING YOUR DISHWASHER
1.
Check the filters for debris that may have been introduced from the
packaging or during installation. See the "Clean Filters" section.
2.
Add Rinse Aid. See "Proper Use of Rinse Aid."
USING YOUR NEW DISHWASHER
NOTE: To decrease cycle time and possibly improve performance, turn on
the hot water faucet nearest to the dishwasher until the water runs hot.
Turn off the water.
1.
Load dishwasher. See "Dishwasher Loading."
2.
Add detergent. See "Proper Use of Detergent."
3.
Select desired CYCLE and OPTIONS. See "Cycle and Option Charts."
•
Only the Options available for the Cycle selected will illuminate.
•
The controls of the selected Cycle and Options will glow to indicate
they are selected.
4.
Close the door firmly to latch.
5.
Press START.
11
Publicidad
