Injecta Taurus TM2 Serie Manual De Instalación página 11

6. HANDLING AND TRANSPORTATION
6.1 Handling
The correct way to handle the pump is shown on the drawing here below.
If the pump is assembled on a baseplate with lifting lugs use them for handling.
ð in any case note the following instructions:
• do not sling, pull, push the pumphead nozzles or flanges
• do not sling, pull, push the adjustment knob
• do not sling, pull, push the plunger
ð when lifting loads pay attention to the following
• dress helmet, accident protective shoes and gloves
• do not stand under hanging loads
• do not hand lift overload
when hand lifting load do not assume position that can be dangerous for the spinal column and dorsal mus-
•
cles
DosingPump.ir
rev. 4.0 EN
9