Injecta Taurus TM2 Serie Manual De Instalación página 4

1. DESCRIPTION
1 Testata
2 Meccanismo
3 Regolazione
4 Motore
The metering pump is a reciprocating positive displacement pump; basic components are: the prime mover (gen-
erally it is an electric motor), the gearbox, the mechanism, the stroke length adjustment and the liquid end .
ð THE DESIGN OF THE METERING PUMP FULFILLS ITALIAN SAFETY AND ACCIDENT PREVENTION
REGULATIONS.
ð PRODUCT INTENDED FOR PROFESSIONAL USE, BY SKILLED PEOPLE.
Safety instructions
WARNING
Exceeding the maximum allowed operating pressure must be prevented
(e.g. by using a pressure relief valve)
Before starting to work on the metering pump verify carefully the following:
• the drive is disconnected from the power source
• parts such as pumphead and piping are depressurized
• parts in contact with aggressive substances are washed before handling
• personnel protection is carried out according to local regulations
Cabeza Pump head
Mecanismo Mechanism
Regulaciòn Adjustment
Motor Motor
DosingPump.ir
rev. 4.0 EN
Tête Pumpenkopf
Mecanisme Triebwerk
Régulation Hubeinstellung
Moteur Motor
2