Publicidad
Idiomas disponibles
Idiomas disponibles
Programming the automatic cleaning end time
1. Press the
button twice: the
display will begin to flash.
2. Turn the TIMER knob towards " " and " " to adjust the cleaning end
time value.
3. Once you have reached the desired end time, press the
The display will show the duration, the cleaning end time and the set cleaning
level alternately.
4. Press the
button to activate the programmed mode.
Programming has been set when the
5. Once cleaning has finished, "END" appears on the display and a buzzer
sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level
has been selected, with the default duration of 1 hour. 12:30 is scheduled
as the end time. The programme will start automatically at 11:30 a.m.
To cancel programming press the
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait for the
switch off: this indicates the oven temperature has dropped to an acceptable
level. You will notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge once the oven
has cooled down completely. Alternatively, you can make use of the already
heated oven, in which case it is not necessary to remove the deposits, they
are completely harmless and will not affect your food in any way.
icon and the numerical digits on the
button again.
and
buttons are illuminated.
button.
icon to
GB
29
Publicidad
