Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
TO AVOID RISK OF
ELECTRICAL
SHOCK!
Repairs or replacement
of parts
may be carried out by authorized
technicians
only.
Problem
Dryerdoesnotstart.
"StaWStop" indicatorlightdoesnot
illuminate.
Programhas beeninterrupted,
A warningsignalis emittedand the
dryingindicatorlight (LED)is blinking
Degreeof dryinghasnot beenreached
or the dryingtime istoo long. T he
dryingand dampdry indicatorlights
(LED's) a re blinking.
Before calling the customer service,
check whether you can rectify the fault
yourself by means of the following
table.
If a fault cannot be rectified or a repair
is required:
Possiblecause
Main plugnot inserted at all or not insertedcorrectly.
A fuse of powersupplyhastripped.
"Start/Stop"buttonnot pressed.
No programselected,
Doornot closed.
Ambienttemperaturebelow41 °F/5 °C.
Lint filter dirty.
Exhaust a ir duct is blockedor too long.
Fault in programsequence or malfunction.
The room/cabinet i s not adequately ventilated.
Moisturesensordirty.
Exhaust a ir duct is blockedor too long.
Lint filter dirty.
Laundrywas too wet.
Unsuitableprogramselected,
Maximumdryingtime was exceeded.
Motor limit temperaturewas exceeded.
"StaWStop" indicatorlightdoesnot
Fault in programsequence or malfunction,
illuminate."Wrinkleblock" indicator
lights.
Lintfilter LEDis blinkingafter lint filter
Blinkingof lintfilter LEDis not an indicationof a
hasbeencleaned
problem. It is usedonlyas a reminder.
1. Set program selector to "Off".
2. Turn off the circuit breaker,
3. Pull the main plug out of the
socket,
4. Call customer service
(see page 20).
Remedialaction
Insertmainplug correctly.
Replace/switch o n fuse.
Press"Start/Stop"button.
Selectprogram.
Closedoor.
Increaseroomtemperature.
Cleanfilter asdescribedon page18.
Switchoff/switchon again.
Cleanexhaustair duct. Reduce exhaustair duct to
maximumlengthas described on page7.
Switchoff/switchon again.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram,
Providean adequatesupplyof fresh air.
Switchoff/switchon again.
Cleanmoisturesensoras described on page18.
Switchoff/switchon again.
Cleanexhaustair extraction.Reduce exhaustair duct
to maximum length as described on page7.
Switchoff/switchon again.
Cleanfilter asdescribedon page18.
Switchoff/switchon again.
Spin laundryat higherspeedin the washing
machine,Switchoff/switchon again.
Selectprogramwith aid of the programselection
table(seepage 15).Switchoff/switchon again.
Cleanlintfilter (seepage18).
Checkexhaustair extraction.
Spin laundryat a higherspeedin your washer.
Switchoff dryer,leaveto cooldownfor 30 min.
Switchon again.Start program.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram.
Noaction required. Lightwill stop blinking.
19
Publicidad
