Craftsman professional INCREDI-PULL 316.794802 Manual Del Operador página 5

ASSEMBLING THE BLOWER TUBE
unit, shut the unit off before removing or installing the blower tubes.
installing the Flex Tube
1. Place a hose clamp over the end of the Flex Tube (Fig. 1A).
2. Slide the end of the Flex Tube with the clamp on it over the elbow tube
(Fig. 1, B).
3. Tighten the screw on the hose clamp to secure the Flex Tube to the
elbow tube (Fig. 1, C).
B
A
Installing the Lower Blower Tubes and Nozzle
1. Align the bump slot on the end of the lower blower tube with the bump
on the bottom end of the upper blower tube (Fig. 3, A).
2. Insert the bump on the upper blower tube into the bump slot on the
lower blower tube (Fig. 3, A).
3. Twist the lower blower tube clockwise around the upper blower tube
until the upper blower tube bump locks into place (Fig. 3, B).
B
Fig. 3
Fig. I
installing the Upper Blower Tube
1. Place a hose clamp over the other end of the Flex Tube (Fig. 2, A).
2. Slide the end of the hose with the clamp on it over the top end of the
upper blower tube (Fig. 2, B).
3. Tighten the screw on the hose clamp to secure the Flex Tube to the
upper blower tube (Fig. 2, C).
B
A
4. Align the bump slot on the top end of the nozzle with the bump on the
bottom end of the lower blower tube (Fig. 4, A).
5. Insert the bump on the lower blower tube into the bump slot on the
nozzle (Fig. 4, A).
6. Twist the nozzle clockwise around the lower blower tube until the
nozzle bump locks into place (Fig. 4, B).
A
Fig. 4
Fig. 2