Publicidad
Idiomas disponibles
Idiomas disponibles
1. To switch on the oscillating multi tool, press the
"ON/OFF" switch (7) from position 0 to I;
2. To switch off the oscillating multi tool, press the
"ON/OFF" switch from position I to 0.
With triangle backing pad (2):
1. Place the entire surface of the sanding sheet over the
material;
2. Switch on the oscillating multi tool and move it with
some pressure over the workpiece, making transversal
and linear movements;
3. Use coarse sandpaper for material removal and fine
sandpaper for finishing. To decide the best type of
sandpaper to use, perform tests before using it on the
final product.
Dust formed while the equipment is in use can be
hazardous to health:
▪ Always wear goggles and a dust mask when sanding;
▪ All persons working with the oscillating multi tool or
entering the workspace must wear a dust mask;
▪ Eating, drinking and smoking are forbidden while
operating the oscillating multi tool;
▪ This oscillating multi tool is suitable for sanding wood,
iron, plastic and similar materials;
▪ It is prohibited to use this oscillating multi tool on plaster
and surfaces with lead paint.
With blade (4):
1. Place the blade against the workpiece;
2. Switch on the multi-tool and move it according to the
work to be done.
▪ Always wear goggles and a dust mask when sanding;
▪ All persons working with the oscillating multi tool or
entering the workspace must wear a dust mask;
▪ Eating, drinking and smoking are forbidden while
operating the oscillating multi tool;
▪ This multi-tool is used to cut wood, plastic and similar
materials;
▪ It is prohibited to use this oscillating multi tool on plaster
and surfaces with lead paint.
With metal spatula (1):
1. Place the metal spatula against the workpiece;
2. Switch on the multi-tool and move it according to the
work to be done.
▪ Always wear goggles and a dust mask when sanding;
▪ All persons working with the oscillating multi tool or
entering the workspace must wear a dust mask;
▪ Eating, drinking and smoking are forbidden while
operating the oscillating multi tool;
▪ This multi-tool can be used to remove materials such as
adhesives, vinyl and similar materials from wood,
plastic, metal and painted surfaces;
▪ It is prohibited to use this oscillating multi tool on plaster
and surfaces with lead paint.
Publicidad
