Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONVERSION
INSTRUCTIONS
Natural Gas Hose Connection
1. Remove the LP gas hose and regulator
using a wrench, and attach the natural gas
hose in it's place. (Fig. 38)
LP gas hose and regulator
NG Hose
Fig. 38
Adjust valve control
screw
,
Pull all the knobs off of valve stems. Adjust
the screw in the valve hole using the flathead
screwdriver
(C). Turn screws two complete
turns (720 ° ) counterclockwise.
(Fig. 39)
y J°
/
/
Valve hole
Fig. 39
2.
Press all the knobs back onto valve stems.
,
After all the conversions
are complete,
return heat diffusers to firebox, followed
by the
grates and warming
rack. To check gas leaks, please follow use and care procedure
on
page 30.
18
Publicidad
Tabla de contenido
