Kenmore 10478 Manual De Uso página 8

CONVERSION INSTRUCTIONS
Side Burner Conversion
1. Loosen the side burner screws to expose
the side burner valve. Insert the tool onto
the valve and unscrew orifice from end of
valve. Put the new orifice into the orifice
removal tool and tighten the new orifice into
the valve.
Make sure you are using the correct
orifice, which is marked "1.31". (Fig. 11)
,
Engage burner tube over valve as shown.
(Fig. 12)
The side burner
Fig. 12
Natural Gas Hose Connection
1. Remove the LP gas hose and regulator using a wrench, and attach the natural gas hose
in it's place. (Fig. 13)
LP gas hose and regulator
NG Hose
Fig. 13
8