Skil GH1000B-00 Manual Del Propietário página 13

Attaching/Detaching Battery Pack
(Fig . 2)
WARNING
performing any assembly, adjustments, or
changing accessories .
safety measures reduce the risk of starting the
machine accidentally.To attach the battery
pack:
Align the raised rib on the battery pack with the
grooves on the machine, and then slide the
battery pack onto the machine.
To attach the battery pack:
Make sure the shear/shrubber is switched off.
•
Align the raised ribs on the battery pack with the grooves on the machine, and then slide the
battery pack onto the machine.
Make sure that the latches on the battery pack snap into place and the battery pack is
•
secured to the machine before beginning the operation.
NOTICE: When placing the battery pack on the machine, be sure that the raised ribs on the
battery pack align with the grooves inside the machine and that the latch snaps into place
properly. Improper attachment of the battery pack can cause damage to internal components.
To detach the battery pack:
Make sure the shear/shrubber switched off.
•
Press the battery-release button, located on the front of the battery pack, to release the
•
battery pack.
Pull the battery pack out and remove it from the machine.
•
WARNING
the machine at your side.
Install/Remove the Blade
(Fig . 3a-3b)
WARNING
Be sure to wear protective work gloves while
handling blade.
To install the blade (Fig .3a):
a. Insert the narrow end of the shrub shear
blade or grass shear blade into the machine
housing.
b. Press the two blade release buttons
simultaneously.
c. Press the blade against the machine
housing until it locks in place with an audible click.
Detach the battery pack
from the machine before
Such preventive
Battery machines are always in operating condition. Therefore, always
remove the battery pack when the machine is not in use or when carrying
To prevent injuries, slip the
blade cover over the blade.
Fig. 2
Attach
Battery-
Release
Button
Fig. 3a
a
Detach
b
c
Click
13