HP OfficeJet Pro 9020 Serie Guía De Referencia

HP OfficeJet Pro
Reference Guide
Follow the instructions in the poster to begin printer setup.
Note: If you have problems connecting the printer to your wireless network, try turning the
printer off and then on again to enable the printer to be detected.
Set up a wireless connection
By following the instructions on the printer control panel and installing the HP printer software
or the HP Smart app, you should have successfully connected the printer to the wireless network.
For more information, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting).
Solve wireless problems
When the (Wireless light) remains lit, the printer has successfully connected to your wireless
network. If not, please check the following solutions.
Description Possible cause
Blue light The printer is not
blinking connected to a
network.
Blue light off Wireless is turned
off.
Convert from a USB connection to a wireless connection
Learn more: www.hp.com/go/usbtowifi
9020 series
Solution
Set up wireless:
1. Open the Dashboard on the printer control panel.
2. Touch (Wireless) >
Settings.
3. Touch Wireless Setup Wizard, and then follow the
on-screen instructions.
Turn on wireless:
1. Open the Dashboard on the printer control panel.
2. Touch (Wireless) >
Settings.
3. Touch Wireless to turn it on.
(Settings) > Wireless
(Settings) > Wireless