Publicidad
Step 27
THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW
IMPORTANT:
THESE INSTRUCTIONS TO INSTALL THE ANTI‐TIPPING SAFETY BRACKET PROVIDED WITH THIS
PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* place heaviest items in the
lowest drawers
* Unless specifically designed to
accomodate, do not set TVs or
other heavy objects on the top of
this product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one
drawer at a time
Use of tipover restarints may only
reduce, but not eliminate the risk
of tipover
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm)
through the safety bracket into the stud. Drive the screw through the safety bracket into the wall stud.
Tighten the screw that was not fully tighened in step 5.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move
your unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole
until it is flush. Move your unit into location and fasten the wall bracket to the wall anchor with the
screw. Tighten the screw that was not fully tightened in step 5.
ameriwoodhome.com
c
17
x1
#A84050
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
d
17
for appropriate anchors to
securely attach the safety bracket.
35
hole
d
17
c
17
wallboard
Tube
stud
You
Publicidad
