Klarstein CALDWELL Manual De Instrucciones página 23

TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
"ADD WATER" Lack of Water.
indicator is on.
"ICE FULL" indi- Ice is full in basket.
cator is on.
Ice cubes stick The ice making cycle
together. is too long.
Water temperature in
inner tank is too low.
Ice making cycle Room temperature or
is normal but no water temperature in
ice formed. inner tank is too high.
Refrigerant in cooling
system leaks.
Pipe in the cooling
system is blocked.
SUGGESTED SOLUTIONS
Stop the ice maker, fill water, and
press "ON/OFF" button again to
restart the unit.
Remove ice from ice basket.
Continuous press "Select" button
5 seconds, the unit could make ice
10 cycles even "Ice" indicator is on.
Stop the ice maker, and restart it
when the ice blocks melt. Select
the small size ice cube selection.
Replace the water. Temperature of
water recommended at 8-32 °C.
The room temperature should
be 10-43 °C, water temperature
should be 8-32 °C.
Verify by a qualified technician.
Verify by a qualified technician.
EN
23