Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not use with loads other than those indicated in the technical data.
• Power lines and output connections must be properly wired and protected by fuses when required by
national and local regulatory requirements.
Failure to comply with these instructions may result in death, serious injury or damage to
equipment.
GENERAL ASPECTS OF SAFETY AND REGULATORY INCOMPATIBILITY
• Any use of this product other than the permitted use /intended use is prohibited.
• The manufacturer cannot be held liable for damage that occurs as a result of improper use or as a result
of an installation that does not comply with the requirements of this manual.
• The liability of the manufacturer for damages resulting from accidents of any nature caused by defective
products, are only those provided for by legal obligations.
• All operations indicated in this manual must be carried out exclusively by experienced, qualified and
trained personnel.
• The preparation of the cables, the laying, the connection and the testing must be carried out observing
the rule of art, in compliance with the rules, regulations and laws in force.
• During installation, testing and maintenance, properly delimit the entire site to avoid access by unauthor-
ized persons, in particular minors and children.
• Before proceeding with the installation, check the mechanical goodness of the movable door and the
support and guide structure.
• Keep this manual in the technical file together with the manuals of the other devices used for the realiza-
tion of the automation system.
• Ensure that all equipment used and systems designed comply with all applicable local, regional and
national regulations and regulations.
Failure to comply with these instructions may result in death, serious injury or damage to
equipment.
• The data included in this manual have been compiled and verified with the utmost care, however the
manufacturer cannot accept any responsibility for any errors, omissions or approximations due to technical
or graphic requirements.
• The manufacturer reserves the right to change the specifications of the appliance without prior notice.
• The manufacturer recalls that this manual does not replace the provisions of the rules that the manufac-
turer of the motorized door/gate is required to comply with.
The manufacturer assumes no liability for any consequences arising from the misuse of this
material.
WARRANTY - The manufacturer's warranty is valid by law from the date printed on the product and is limited to the free repair or
replacement of parts recognized by the manufacturer as defective due to lack of essential qualities in the materials or for errors
in the production process. The warranty does not cover damage or defects due to external agents, lack of maintenance, overload,
normal wear, installation error, or other causes not attributable to the manufacturer. Tampered products will not be covered by
warranty. The manufacturer is not responsible for malfunctions or degradation of performance due to environmental interference,
such as electromagnetic disturbances; therefore, the warranty expires in these situations.
4 - English - Translated from the original language
WARNING
RISK OF OVERHEATING AND/OR FIRE
WARNING
6-1620173M - rev. 0 - 30/10/2023
Publicidad
