Allmatic RCOO PLUS Manual De Instalacion Y Uso página 30

6.2 - TOTAL DELETION OF MEMORY
• This procedure involves the cancellation of all TCOO learned in the receiver.
• The cancellation procedure is automatically abandoned for TIME OUT after 10 seconds, or if the PROG/
RESET key is pressed for a time not long enough.
• In case of replacement of a TCOO it is necessary to perform the total erasure of the memory and then
re-program all the TCOO used.
• Press and hold the PROG/RESET button for at least 7 seconds, when the PROG/RESET, L1 and L2 LEDs flash quickly release the
button.
• Within 10 seconds, press and hold the PROG/RESET button for at least 3 seconds to perform total memory erase.
• When the L1 and L2 LEDs blink slowly release the PROG/RESET button.
• The buzzer performs three audible signals to indicate correct cancellation and the PROG/RESET LED turns off.
• Below the L1, L2 and CHECK LEDs light fixed.
7. MAINTENANCE
Before carrying out any cleaning, maintenance or replacement of parts, remove power to the automation. Every 12 months of
operation, the following maintenance measures are mandatory:
• Check and clean any dirt, insects and dust residues that have been placed inside. • Check the integrity of the cables and their
connections, including clamping contact, and make the necessary replacements. • Verify the integrity of the protective shells and
sensitive safety edges connected to the TCOO, and perform the necessary replacements. • Perform a general and complete check
of the screws and bolts. • Perform a functional product check by checking the correct operation of the switchboard in the event of
an RCOO output alarm. • Check battery status and replace if necessary.
8. PRODUCT DISPOSAL
As for installation operations, the disassembly of this product must be carried out by qualified personnel. The symbol
on the side indicates that the product should not be disposed of as unsorted waste, but should be sent to separate
collection facilities for recovery and recycling. For disposal check the recycling or disposal systems provided by the
territorial regulations in force for this category of product, or return the product to the seller.
WARNING - • This product consists of various types of materials: some parts of the product may contain pollutants
or dangerous substances that, if dispersed, could cause harmful effects to the environment and health. • Local
regulations may provide for heavy penalties in the event of incorrect disposal of this product
14 - English - Translated from the original language
WARNING
6-1620173M - rev. 0 - 30/10/2023