Publicidad
Idiomas disponibles
Idiomas disponibles
Parts Identification and Function
Item
Description
1
Thermocouple
Connector
2
Digital Display
3
ON / OFF Switch
4
°F / °C Switch
5
Scroll (CLR)
6
Record / ITS
7
Operating Instructions
8
Battery Access Door
Specifications
Range
Resolution
Accuracy
Ambient
Temperature Limits
Broken / Open Probe
Display
Auto Off
Power
Battery Life
Low Battery
Operating Instructions
To operate as a standard thermometer:
1. Insert Type K thermocouple probe into connector on top of instrument. Observe correct
polarity when connecting probe (indicated by "+" and "-" markings).
2. Press
button to turn unit on.
3. Press F / C button to select either Fahrenheit or Celsius temperature scale. Instrument
has whole degree resolution in Fahrenheit display and tenth degree resolution in Celsius.
4. Instrument will measure and display real-time temperature.
5. To turn instrument off, press and hold
To operate as a recording thermometer:
In ITS™ (Intelligent Temperature Stabilization™) RECORD MODE, the NSP1413 will store (4)
readings and the instrument will record temperatures in the range of 120° to 210°F (49° to 99°C).
The display will indicate whether the temperature being measured is within this range by displaying
" " on the left side of the display if the temperature is within acceptable limits.
If the temperature is lower than 120°F (49°C), recording is not allowed and the display will
show " ". If the temperature is higher than 210°F (99°C), recording is not allowed and the
display will show " ".
IMPORTANT : WHEN RECORD BUTTON IS PRESSED, F / C BUTTON IS
DISABLED. SELECT TEMPERATURE SCALE BEFORE START OF RECORDING.
1. Perform steps 1-4 above.
2. To enter ITS RECORD MODE press REC button. The display will momentarily show "itS"
(ITS mode), followed by "- -". NOTE: WHEN ITS MODE IS ACTIVE, ITS ICON WILL
APPEAR AT TOP OF DISPLAY.
Qty
Function
1
Connection point for probe. Yellow male plug of probe is
inserted into female connector.
1
Displays temperature readings in °F or °C
1
Turns the instrument ON and OFF
1
Selects °F or °C temperature scale
1
Scrolls through / clears memory contents
1
Selects ITS Mode / Records temperature data
1
Instrument operating instructions
1
Allows battery replacement
Type K Thermocouple -100° to 999°F (-73° to 537°C)
1°F (.1°C)
±1F° (±0.5C°) from -100°F to 999°F (-73°C to 537°C) at ambient
temperatures between 68°F and 86°F (20°C and 30°C)
32°F to 122°F (0°C to 50°C) operating; -13°F to 158°F
(-25°C to 70°C) storage
"Prob" shown on display
3 digit, 1/2" (12.7 mm) LCD display
Turns off unit after 10 minutes of keypad inactivity
1.5V AAA Alkaline batteries QTY 2
1500 hours (typical)
A battery icon on display then "LbAt"
button momentarily.
Quality Assurance Temperature Measurement Kits
5
Publicidad
