Publicidad
Idiomas disponibles
Idiomas disponibles
. Remove the two screws.
5. Remove the Ni-Cd battery after complet-
ing step 4.
Gr
Specifications
Power source :AC 100 - 120/
220 - 240 V ~,
50 - 60 Hz
Motor voltage : DC 1.2 V =
Charging time : 8 hours
. Pull out the plate with coil attached by
double-sided adhesive tape.
. Insert a flathead screwdriver into the slot
marked (1) or (2) to remove the Ni-Cd
batteries.
11
Publicidad
