How to use the mist
The mist cools your skin and closes your
pores after the skin treatment.
Note: Fill the water tank when using for the
first time or when the water runs out.
Do not fill the tank with anything other
than tap water.
When closing the water tank cap, the
internal pressure will cause some
water to come out of the mist spray
nozzle. This is normal.
e. Press the mist button while the switch is
on.
¢ Spray the tip of the nose with mist.
Hold the pore cleanser about 2 inches
away from the tip of your nose, press the
mist button and spray it with mist (for
about 10 seconds).
* Spray the whole face with mist.
Hold the pore cleanser about 6 inches
away from your face, press the mist but-
ton and spray the mist so that it covers
the whole face (for about 20 seconds).
In places with high humidity such as a bath-
room in summer, the mist may not feel cool.