Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Possible faults
Red error LED flash-
Overload.
es.
Temperature deviation.
The power trigger and the start button are
pushed at the same time.
Green LED and red
Battery is empty.
LED flash alternately.
Battery is damaged.
Battery charger
LED on the battery
Cause
charger
The green LED is
The battery is not correctly instal-
on and the red LED
led in the battery charger.
flashes.
The battery connectors are dirty.
The ambient temperature is too
high or too low.
The battery is defective.
The green LED and
The battery charger is not cor-
the red LED are off.
rectly connected to the mains
outlet.
Faulty mains outlet.
The battery charger cable is de-
fective.
The battery charger is defective.
Other errors.
If other errors occur, make sure that the product is off, remove the battery and speak to an
approved service agent.
Transportation, storage and disposal
Transportation and storage
•
The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
•
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
•
Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
1885 - 005 - 18.12.2023
Possible solution
The cutting attachment cannot move freely.
Release the cutting attachment.
Let the product become cool.
Release the power trigger and push the start
button.
Charge the battery.
Speak to your service dealer.
Solution
Remove the battery from the charger and install the bat-
tery in the battery charger again.
Clean the battery connectors.
Use the battery charger in temperatures between 0 °C –
+35 °C.
Replace the battery.
Connect the battery charger to a mains outlet.
Connect the battery charger to the voltage and frequency
that is specified on the rating plate.
Speak to an approved service agent.
•
Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
•
Remove the battery for storage or transportation.
•
Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
•
Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
•
Put the battery in storage where the temperature
is between -20°C/-4°F and +50°C/122°F and away
from open sunlight.
19
Publicidad
