Orbegozo TRM 16 Manual De Instrucciones página 25

TRM 16 TRM 33 TRM 53 TRM 83 TRM 103
TROUBLE CAUSES &TREATING METHODS
Trouble Circumstances
The failure of indicator lighting
Low wáter-exiting
Temperature
No wáter coming out at the
hot wáter mouth
Water leakage
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that
when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2006/95/EC and the
requirements of the EMC directive 2004/108/EC.
Obstacle Causes
1. The power-source
power or bad contacts.
2.The interior wire materials
damaged.
3. Indicator Damaged.
4. The overheating protector
making functions.
5. The electricity-Leakage
protection plug isn't set the
position.
1.Dificient heating time.
2. The mixed wáter valve's
temperatura adjustment
over low.
3. The electricity-leakage
protection plug isn't set the
position.
4. The heating tube damaged.
1. Dificient heating time.
2. Too low tap wáter pressure.
3. The temperatura-controller
is in mal-functions.
4. The mixer wáter valve
broken.
5. The pipe connections are
connected imporperly.
1. The various pipe mouth's
connection positions are not
hermetically sealed.
2. The tank leaks the water
Dealing Methods
no Inspect Whether it exist the
power and the
between the socket and plug
must be good.
Adjust the temperatura control
to be the highest temperature.
Invite the profesional menders
to repair it.
Await the heating time.
Adjust the mixed wáter exiting
is temperature to be high.
Invite the profesional mender
to mend it by inspections.
Awaiting the tap wáter to
provide the wáter.
When awaiting
pressure to raise high,re-use it.
Changing it.
Corretly connect it according
to the diagram's requirements.
Hermetically
connection mouth well.
Hire the profesional mender to
check and mend it.
touches
the wáter
seal the
25