Publicidad
Idiomas disponibles
Idiomas disponibles
Storage
If the appliance is not used for a long period of
time, store it in a dry location out of direct sunlight.
1
Operate the product for one hour or more on
a fine day.
• This removes moisture and prevents molds
from building up inside the product.
2
Turn off the power and unplug it from the
electrical outlet.
• Wind the power cord around the bottom of
the appliance.
3
Cover the appliance to prevent dust or foreign
substances from entering the appliance. Store
the covered appliance out of direct sunlight.
CAUTION
• Do not store the appliance in a humid location
or where it is exposed to direct sunlight. Doing
so can lead to product deformation or odors.
Cleaning the Appliance
Cleaning the Exterior
1
Remove dust from the air inlet and outlet using
a vacuum cleaner.
2
Wipe the exterior with soft cloth.
NOTE
• If you find it difficult to clean the front and rear
covers, disassemble them first and wash with water.
Then, dry them completely out of direct sunlight.
24
Cleaning the Particulate Sensor
The PM1.0 sensor is used to detect fine as well
as coarse particulates. For best results, clean the
sensor lens frequently.
1
Remove the rear cover from the appliance.
2
Open the sensor cover.
3
Clean the lens with a cotton swab soaked with
water and dry it off with a dry cotton swab.
NOTE
• Use only water to clean the sensor. Using
other materials may cause the appliance to
malfunction.
EN
Publicidad
