Installation
• Do not install the appliance on an uneven or inclined surface.
• Do not install the appliance in an area exposed to direct sunlight or
near heat-generating equipment.
• Do not install the product in a place where combustible gas may leak
or industrial oil or metallic particulates are present.
• Do not allow the appliance to push against the power cord or plug.
• Do not touch the power plug with wet hands.
• When unplugging the power cord, always pull it by the plug.
• Unplug the appliance during thunder or lightning storms or when not
in use for a long time.
• Do not bend the power cord excessively or place a heavy object on
top of it.
• Do not extend the length of the power cord or alter it.
• Do not use several devices on a multi-socket extension outlet.
• Make the connection securely so that screw in terminals will not be
loosened when the power cord is pulled.
• Make sure that the power cord cannot be be pulled out or damaged
during operation.
• If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
• This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
4
EN