Publicidad
Idiomas disponibles
Idiomas disponibles
1、Flameout preset switch
The flameout switch is located on the right side of the direction handle, and the flameout preset switch has two positions：
"
"and"
"。
The flameout switch is off-the ignition circuit is disconnected at this position, the running engine is
OFF"
"
turned off, and the engine cannot be started.
ON"
"
The flameout switch is ON needs to be switched to this position during operation, and the ignition
circuit is closed.
2. Headlight, position light switch
The headlight and position light switch have three states："
headlight"
"
Position light"
" When the switch is in this position, the position light and tail light are on.
OFF" ● "
3. Electric start button
The method of operation is: After completing the preparations for starting (see page 16), press the electric start
button"
"，If necessary, turn the throttle grip cover at the same time to refuel properly to start the engine.
When the switch is in this position, the headlights, position lights and taillights are on.
When the switch is in this position, the headlights, position lights and taillights will be
turned off.
" "
" "●"
23
Publicidad
