Publicidad
Idiomas disponibles
Idiomas disponibles
[Adjustment]
1. The free stroke of the throttle handle: 2～6mm.
2. The upper adjustment solenoid can be fine-tuned, and the lower adjustment solenoid (the connection between the
throttle valve and the throttle cable) can be adjusted for a certain stroke.
3. When fine-tuning, first loosen the lock nut on the upper adjusting solenoid, and then turn the upper adjusting solenoid
to adjust.
4. When making a larger range of adjustment, loosen the fastening nut and adjust the free stroke to 2～6mm.
5. The throttle cable should be filled with lubricating oil regularly to reduce the abrasion of the wire rope; the throttle
cable cannot be bent.
Danger:
1. The throttle cable is improperly routed and should be reinstalled correctly.
2. If the throttle cable is twisted, stuck or unable to return, the throttle control cable should be replaced.
3. After the free stroke adjustment of the throttle cable is completed, it must be ensured that the throttle control
handle can automatically return to the position and the idle speed will not increase. At the same time, after
adjustment, the engine idling speed cannot increase when turning the front of the vehicle.
52
Publicidad
