Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
1. Before shifting down gears, reduce the vehicle speed or increase the engine speed. Before entering the high gear,
increase the vehicle speed or reduce the engine speed. This prevents unnecessary wear of the transmission system
components and rear tires.
2. When the gear is in neutral and the neutral indicator is on, it is best to slowly loosen the clutch handle to confirm
whether it really enters the neutral position.
5.4.2 Climbing or turning driving (Figure 14)
1) When driving uphill, the gear will be too high and there will be insufficient power to decelerate. Therefore, the gear
must be quickly lowered before driving uphill.
2) When driving down a long slope, the gear must be lowered and the front and rear brakes should be used intermittently.
If the front and rear brakes are used continuously for a long time, the brakes will overheat and reduce the braking effect,
resulting in danger.
3) When going downhill, it is not allowed to turn off the ignition switch or turn off the engine flameout switch to slide,
otherwise it will reduce the life of the catalyst in the exhaust muffler.
4) Before turning, you must first use the brakes to reduce the vehicle speed and then lower the gear. Otherwise, when the
vehicle is turning, the speed is too fast to rush out of the curve, or the brake is used when turning, which may cause a
dangerous accident.
38
Publicidad
