GE GFDS175 Manual Del Propietário página 15

Installation Instructions
STACKING THE WASHER AND
DRYER{if desired){cont.)
INSTALLING THE STACK BRACKET
KIT
STACKING KIT GEFLSTACK CONTENTS
(OPTIONAL ACCESSORY}
,o oj
I o o e 1----
17 Left hand bracket 04 #12 x 1" screws
17 Right hand bracket 174 #8 × 1/2" screws
04 rubber pads
TOOLS YOU WILL NEED
C1Phillips screwdriver 1__
C1GIoves
ClOpen-ended wrench
C1Level
C1Pliers
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay the
dryer down on its side. Continue using the carton to
protect the finished floor in front of
the installation location.
I_] REMOVE THE DRYER LEVELING LEGS
A. Carefully lay the dryer on its side. Use the
packing material so you don't scratch the finish
on the dryer.
B.
Use an open-end wrench or pliers to remove the
dryer leveling legs.
r move
r_l INSTALL RUBBER PADS TO DRYER
BASE
Locate the 4 rubber pads in the parts package.
Remove the adhesive backing and firmly place
over each bracket where you removed the
leveling legs.
Place pads over
all four leveling
leg brackets
15