Publicidad
Idiomas disponibles
Idiomas disponibles
Bubble Bliss Features
• Rejuvenating bubbles provide a relaxing massage
• Heat helps maintain water temperature
• Raised nodes in floor reinvigorate tired, sore feet
• Splash guard with foot rest; convenient for pedicures
Instructions for Use
1. Ensure that the unit is unplugged before filling with water. Fill with warm
water to the fill line located on the inside of the tub (Fig 1).
NOTE: Heat will only help to maintain the temperature of water placed
inside the footbath. It will not heat cold water. For a warm water massage,
fill the unit with warm water.
2. Plug the unit into a 120 volt household outlet.
3. Press power button once to turn on bubbles and heat (Fig 1).
4. While seated, place your feet in the spa.
5. Enjoy a deep penetrating massage by sliding feet back and forth over the
raised nodes on the footbath floor.
6. When finished, depress power button once.
7. To empty: First, unplug the unit. Tip the unit, allowing water to pour out
along the drain spout. DO NOT pour water over the power button (Fig 1).
6
Caution:
Maintenance
To avoid injury
To Clean
and irreparable
Unplug the unit and allow it to cool before cleaning. Clean only
damage, always
with a soft, damp cloth and mild cleansing agent.
remain seated
• After cleaning, wipe surfaces with a dry cloth.
when using this
• Never use strong abrasives, detergents or cleansing agents.
footbath. Never
• Periodically straighten cord if it becomes twisted.
stand on or in
the unit.
To Store
Unplug the appliance from the outlet and allow to cool and dry.
CAUTION: THIS
• Store in its box or a clean, dry place.
UNIT CAN ONLY
• To avoid breakage, do not wrap the power cord around the unit.
RUN WITH
• Do not hang the unit by the power cord.
WATER IN IT.
• This appliance is designed for household use only.
DO NOT USE
Figure 1
WITHOUT
WATER.
Drain Spout
CAUTION:
DO NOT FILL WATER OVER THE FILL LINE
Fill Line
Power Button
7
Publicidad
