Tires; Seat Cushion - Küschall THEKSL Manual Del Usuario

The KSL
Deactivating the antitipper
1. Push the antitipper completely downwards against the spring
and swivel it inwards through 90° until it engages.
Setting the height
1. Press the spring pin A on the antitipper and push the inner
section to the position required. Allow the spring pin to
engage in the nearest hole.
If further adjustments of height and/or position are
necessary, refer to your specialized dealer.

3.7 Tires

The ideal pressure depends on the tire type:
The table below is an indication. In case the tire differs from the
list below, check the side of the tire, the maximum pressure is
often listed there.
Tire
Light wheel 7 bar
Profile tire 7 bar
Schwalbe® Marathon 10 bar
Plus tire
Schwalbe® One 10 bar
Schwalbe® Rightrun, 10 bar
blue
-
Solid tire, profile, grey
14
Max. pressure
700 kPa 101 psi
700 kPa 101 psi
1000 kPa 145 psi
145 psi
1000 kPa
1000 kPa 145 psi
- -
Tire
-
Solid tire (KIK type),
black
-
Solid, light wheel
The compatibility of the tires listed above depends on the
configuration and/or model of your wheelchair.

3.8 Seat cushion

A suitable cushion is needed to provide an even pressure
distribution on the seat.
Use a seat cushion with anti-slip underlay or Velcro®
(hook) fastening tapes to avoid slipping of the seat
cushion. A Velcro® (loop) fastening tape is pre-attached
to the seat cover.
Max. pressure
- -
- -
1583553-A