Setting the height
1.
Press the spring pin A on the antitipper and push the inner
section to the position required. Allow the spring pin to
engage in the nearest hole.
3.10 Tires
The ideal pressure depends on the tire type:
The table below is an indication. In case the tire differs from the
list below, check the side of the tire, the maximum pressure is
often listed there.
Tire
Light wheel
7 bar
Profile tire
7 bar
Schwalbe® Marathon
10 bar
Evolution tire
Schwalbe® One
10 bar
Schwalbe® Rightrun,
10 bar
blue
-
Solid tire, profile, grey
-
Solid tire (KIK type),
black
-
Solid, light wheel
The compatibility of the tires listed above depends on the
configuration and/or model of your wheelchair.
1583571-A
Max. pressure
700 kPa
101 psi
700 kPa
101 psi
145 psi
1000 kPa
1000 kPa
145 psi
1000 kPa
145 psi
-
-
-
-
-
-
3.11 Seat cushion
A suitable cushion is needed to provide an even pressure
distribution on the seat.
Use an antislip underlay or Velcro® fastening tapes to
avoid slipping of the seat cushion.
3.12 Seat position
Tipping stability
The seat position and thus the tipping stability of your wheelchair
can be altered. The adjustment must be carried out by the
specialist dealer.
Seat height front
The front seat height can be adjusted. The adjustment must be
carried out by the specialist dealer.
Seat height rear
The rear seat height can be adjusted by several centimeters. The
adjustment must be carried out by the specialist dealer.
Components and their functions
15