Publicidad
Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up the DIS-200G Series
Layer 2 Gigabit Industrial Smart Managed Switch.
The model you have purchased may appear slightly
different from the one shown in the illustrations. For
more detailed information about the switch, please
refer to the user manual.
Package Contents
This package should include the following items:
•
DIS-200G Series switch
•
DIN rail mounting kit
•
Wall mounting kit
•
User guide CD
•
Quick Installation Guide
•
Console cable
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview
LED Indicators
2
Figure 1
All Switches
#
1
2
3
4
5
6
DIS-200G-12PS/PSW
1
3, 4, 5
6
LED
Status
Solid
The DIS-200G is on and accepting web
green
connections.
Blinking
A firmware update is in progress.
green
SYS
Solid
The DIS-200G is not ready for
amber
communication.
The DIS-200G is booting up or PoE has
Blinking
failed during system operation (DIS-200G-
amber
12PS/PSW models only).
Solid
The power supply to the DIS-200G has
ALM
amber
failed.
Solid
Power source 1 is connected.
PWR 1
green
Solid
Power source 2 is connected.
PWR 2
green
Solid
Power source 3 is connected.
PWR 3
green
Solid
Port is connected at 1 Gbps.
green
Ports
11 - 12
Blinking
There is activity on the port at 1 Gbps.
green
Table 1
1
2, 3
2
Figure 2
Description
1
Publicidad
