Descargar Imprimir esta página

D-Link DIS-200G-12S Guía De Instalación Rápida página 9

Publicidad

prompted to log in, enter admin as the default
user name and password.
Telnet
To connect to the switch using Telnet, a Telnet
client is required. This may be included with your
operating system, or can be easily downloaded from
the Internet.
Before connecting to the switch, ensure that your PC
has an IP address in the same range as the switch.
Follow the instructions in the Web User Interface
section for more information on how to do this.
1. Launch the Telnet software and connect to the
IP address of the switch.
2. When you are prompted for a username and
password, enter admin as the default user name
and password.
SNMP
You can manage the switch with D-Link D-View, or
any other SNMP-compatible program. The SNMP
function is disabled by default and must be enabled
on the switch first by using either the Web UI, DNA,
the console, or Telnet.
D-View SNMP Network Management System is
a comprehensive standard-based management
tool designed to centrally manage critical network
infrastructure. D-View provides useful tools to allow
network administrators to effectively manage device
configurations, fault tolerance, performance, and
security.
D-Link offers a free version of D-View which can
be used to manage up to 25 devices. Visit
http://dview.dlink.com/
get more information.
Device Reset
If you have any problems accessing the DIS-200G,
it can be reset using the following instructions:
1. Press and hold the reset button for 6 to 10
seconds. All the LEDs on the DIS-200G will light
amber. When this happens, release the reset
to download it and
button and the DIS-200G will be reset to factory
defaults.
Note: holding the reset button for more than 11
seconds will cause all LEDs on the DIS-200G to
light green. Holding the reset button for a further
2 seconds will put the DIS-200G into boot loader
mode.
Additional Information
You can refer to the user manual or visit
http://support.dlink.com/
D-Link Managed Switch User Manual
This manual describes the general
installation and how to connect the switch in
various scenarios.
Online Support
If there are any issues that are not in the user
http://support.dlink.com/
manual, please visit
which will direct you to your appropriate local
D-Link support website.
Warranty Information
Visit
http://warranty.dlink.com/
D-Link Limited Lifetime Warranty information.
for more support.
to view the
7

Publicidad

loading

Este manual también es adecuado para:

Dis-200g serieDis-200g-12psDis-200g-12psw