Care And Maintenance; Replacement Parts; Fcc Compliance Statement - Beurer MP 42 Manual De Instrucciones

6. Care and Maintenance

Turn the unit off and unplug the power cord from the electrical outlet before
cleaning the device. Clean the device with a slightly moistened cloth. You can
also moisten the cloth with a mild detergent to remove stubborn stains. Keep
water out of the device. If water does contact the device, let it dry thoroughly
before using. Clean the attachments with a cloth or brush moistened with alcohol;
dry them carefully afterwards. Do not use harsh chemicals or abrasive cleaners
on the device.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accor-
dance with local regulations.
If you have any questions, please contact the local authorities responsible for
waste disposal.

7. Replacement Parts

A complete replacement set (UPC 853879007577) is available on
www.amazon.com. The following parts are included:
Flame milling cutter
Cylindrical milling cutter
Felt cone
Sapphire cone
Sapphire callus rasp
Coarse Sapphire Disc
Fine Sapphire Disc

8. FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
8
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular instal lation. If this equipment
does cause harmful interference to radio or television reception, which can be
deter mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
9. Warranty
Limited Lifetime Warranty For Original Purchaser
Your Beurer Manicure/Pedicure Set, model MP 42, is warranted to be free from
defects in materials and workmanship for the life of the product under normal
conditions of intended use and service. This warranty extends only to the original
retail purchaser and does not extend to retailers or subsequent owners.
We will, at our option, repair or replace the Beurer Manicure/Pedicure Set, model
MP 42, without additional charge, for any part or parts covered by these written
warranties. No refunds will be given. Repair or replacement is our only responsi-
bility and your only remedy under this written warranty. If replacement parts for
defective materials are not available, Beurer reserves the right to make product
substitutions in lieu of repair or replacement.
For warranty service contact our customer service department at 1-800-536-0366
or at info@beurer.com to provide a description of the problem. If the problem is
deemed to be within the scope of the limited lifetime warranty, you will be asked
to mail the product at your costs in its original package with proof of purchase,
your name, address and phone number. If the problem is not deemed to be within
the scope of the limited lifetime warranty, we will provide a quotation for repair
respectively replacement and return shipping fee.
9