SHERCO BIKEN Manual Del Usuario página 57

ELECTRIC ASSISTANCE
Electric assistance helps you move forward only when you are pedalling. If you are not pedalling, there is no
assistance. The power delivered by the motor always depends on the effort exerted on the pedals. The harder
you press on the pedals, the greater the electric assistance, regardless of the level of assistance you choose. The
electric assistance stops automatically when you reach a speed of more than 25 km/h. It reactivates automatically
when the speed drops below 25 km/h
There is a push-assist function, which allows you to move the electric bike at low speed without having to pedal.
At any time, you can use the electric bike like a conventional bicycle, without assistance. Simply switch off the
assistance, or select the "OFF" assistance level. This also applies when the battery is running low.
The electric assistance of your Sherco biken is provided by the following components:
• The on-board computer.
• The motor, located in the lower central position (level with the pedals) and fitted with a torque sensor.
• The battery.
3
• A speed sensor located on the rear wheel.
4
1
4
1
2
3
2
57