Publicidad
Wireless Quick Charger 15 W
EN
Chargeur Rapide sans Fil 15 W
FR
Do not operate a device if it is not in working order. In such
cases, it must be secured against unintentional further use.
• Use product, product parts and accessories only in per-
fect condition.
• In case of questions, defects, mechanical damage, trou-
ble and other problems, non-recoverable by the docu-
mentation, contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and di-
rect sunlight, microwaves, vibrations and mechanical
pressure.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against ac-
cidental use.
Heat storage
Heat is generated during inductive charging.
• Make sure that there are no metal parts on the back of
your device (e.g. metal cover, metal plate for magne-
tic holder).
Metal heats up strongly in the induction field and can cause
damage to the product or your end device.
• Do not cover the product.
Magnetism
The product contains magnetic materials.
• Consult a medical professional before you use the pro-
duct to make sure it is compatible with implanted medi-
cal devices.
• Maintain a minimum distance of 20 cm from medical de-
vices.
• Do not operate and/or store the product near credit, debit
or other bank cards.
2 Description and function
2.1 Product
The product is an inductive charger including adapter cable
for wireless charging of mobile devices that support the Qi
standard (e.g. smartphones). The charger can be connected
to a PC, USB charging adapter or USB car charging adap-
ter via the adapter cable. In order to use the Quick Charge
(QC) function, a charging adapter with QC technology is re-
quired (not included).
2.2 Scope of delivery
Wireless Quick Charger 15 W, Adapter cable, User Manual
2.3 Operating Elements
See Fig. 1.
1 Charging interface
2 USB-C™ socket
3 Status LED
3 Intended use
We do not permit using the device in other ways
like described in chapter „Description and Functi-
on" or in the „Safety Instructions". Use the product
only in dry interior rooms. Not attending to these regulations
and safety instructions might cause fatal accidents, injuries,
and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2. Compare the specifications of all used devices and en-
sure compatibility.
5 Connection and operation
1. Connect the charger to a suitable power source via the
adapter cable.
This can be either a 230 V USB charging adapter, a
12/24 V car USB charger or the USB socket of a PC. To
use the full power, a USB charging adapter with QC tech-
nology is required (not included).
As soon as the charger is connected to a power source,
the status LED flashes green and blue and then goes out.
2. Place your device on the charging interface.
When the device is charging, the status LED lights up blue.
If a metallic object is detected on the charging interface,
the status LED flashes blue.
3. Remove your device from the charger when it is ful-
ly charged.
REV2023-09-29
Subject to change without notice. |
V1.0anw
Sous réserve de modifications.
4 USB-A plug
5 USB-C™ plug
6 Maintenance, Care, Storage and Transpor-
tation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
According to the European WEEE directive, electri-
cal and electronic equipment must not be disposed
with consumers waste. Its components must be re-
cycled or disposed apart from each other. Otherwise
contaminative and hazardous substances can da-
mage the health and pollute the environment. As a consu-
mer, you are committed by law to dispose electrical and
electronic devices to the producer, the dealer, or public col-
lecting points at the end of the devices lifetime for free. Par-
ticulars are regulated in national right. The symbol on the
product, in the user manual, or at the packaging alludes to
these terms. With this kind of waste separation, application,
and waste disposal of used devices you achieve an import-
ant share to environmental protection.
WEEE No: 82898622
8 EU Declaration of conformity
Hereby Goobay®, a registered trademark of
Wentronic GmbH, ensures that the mentioned
radio system type is conformed to Directive
2014/53/EU. The full text of EU Declaration of Conformity is
available at the following Internet address:
https://www.wentronic.com/en/
Enter the item number in the search bar to go to the specific
item page. The current declaration of conformity is available
in the download section.
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et com-
prend d'importantes informations pour une bonne installati-
on et une bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement
avant de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d'emploi.
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il
doit au contraire être protégé contre toute utilisation invo-
lontaire.
• Utilisez le produit, pièces et accessoires des produits
uniquement en parfait état.
• En cas de questions, les défauts, les dommages mécani-
ques, des ingérences et d'autres problèmes, non récupé-
rables par la documentation, contactez votre revendeur
ou le producteur.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l'humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pressi-
on mécanique.
Non destiné à des enfants. Le produit n'est pas un jouet !
• Sécuriser l'emballage, petites pièces et l'isolation contre
l'utilisation accidentelle.
Accumulateur de chaleur
De la chaleur est générée pendant la charge par induction.
• Assurez-vous qu'il n'y a pas de pièces métalliques à l'ar-
rière de votre appareil (par exemple, un couvercle mé-
tallique, une plaque métallique pour le support magnét-
ique).
Le métal se réchauffe fortement dans le champ d'induction
et peut endommager le produit ou votre appareil final.
• Ne couvrez pas le produit.
- 3 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
64675
Material damage
Goobay® by Wentronic GmbH
Publicidad
