Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Power supply
LED
LED
alimentazione
UHF1:
first programmable input of UHF band (470÷862 MHz).
UHF2:
second programmable input of UHF band (470÷862 MHz).
UHF3:
third programmable input of UHF band (470÷862 MHz).
FM:
wide band input for FM signals (87÷108 MHz).
BIII + DAB: wide band input for III band signals and DAB signals (174÷300 MHz).
AUX:
auxiliary input (47÷862 MHz).
SAT:
(for FRPRO 10S model only) satellite input (950÷2150 MHz).
TV:
output of TV signal in 47÷862 MHz band.
TV TEST:
output test of TV 47÷862 MHz signal with 25 dB attenuation.
TV + SAT: (for FRPRO 10S model only) TV and SAT signal output (47÷2150 MHz).
USB:
USB plug for pen drive connection and for copying/saving the headend unit configuration.
RJ45:
RJ45 jack for firmware upgrade.
Power LED: ON (green) when the product is fed
Status LED: shows that the headend unit is working
ON: normal operation
FLASHING: unit in boot or updating phase
(1):
Display (16 digits in 2 rows) and keyboard.
(2):
Grounding of the antenna installation (according to EN60728-11).
(3):
Power supply connector
USB
Status LED
LED di stato
29
RJ-45
Publicidad
Tabla de contenido
