Changing The Language - Fracarro FRPRO 10 Instrucciones De Funcionamiento

5.2.1 CHANGING THE LANGUAGE

To change the language of the Profi ler menu, enter the "CONTROL UNIT - LANGUAGE" menu and set the To change the language of the Profi ler menu, enter the "CONTROL UNIT - LANGUAGE" menu and set the
language you want by pressing the
German and English.
CONTROL
UNIT SETUP
CONTROL
UNIT SETUP
Setting the access
PIN (default 1234)
5.2.2 CHANGING THE SAFETY CODE
To enable/change the safety PIN code used to enter the programming, enter the "CONTROL UNIT - USER
CODE" menu.
CONTROL
UNIT SETUP
Setting the access
PIN (default 1234)
Accepted values 0...
Setting the access
PIN (default 1234)
Setting the LCD
contrast.
Accepted values 0...
NOTES:
Load/Save
• Default PIN code: 1234
configuration from/to
• The code will be comprised of a maximum of 4 digits
• It is not possible to set a code if the fi rst digit is "0" It is not possible to set a code if the fi rst digit is "0"
Setting the LCD
contrast.
• Press the
Accepted values 0...
• If the user code is lost, contact Fracarro Technical Support.
15
Load/Save
configuration from/to
5.2.3 USB MEMORY MENU
USB
serial port speed
Load/Save
configuration from/to
USB
dify
Setting the
Reading the installed
the
serial port speed
software version
the
Default Reset:
Setting the
restore the unit to the
serial port speed
factory settings
Reading the installed
software version
Select language from the
programming menu
CONTROL UNIT
LANGUAGE
Select language from the
programming menu
CONTROL UNIT
LANGUAGE
CONTROL UNIT
USER CODE
Select language from the
programming menu
CONTROL UNIT
LANGUAGE
CONTROL UNIT
USER CODE
Setting the LCD
CONTROL UNIT
contrast.
LCD CONTRAST
15
CONTROL UNIT
USER CODE
CONTROL UNIT
LCD CONTRAST
CONTROL UNIT
15
USB STORAGE
USB
CONTROL UNIT
key to return to the previous menu and undo the code's modifi cation
LCD CONTRAST
CONTROL UNIT
USB STORAGE
CONTROL UNIT
Setting the
SERIAL SPEED
CONTROL UNIT
USB STORAGE
CONTROL UNIT
CONTROL UNIT .
SERIAL SPEED
SOFTWARE
VERSION
CONTROL UNIT
CONTROL UNIT
SERIAL SPEED
DEFAULT RESET
CONTROL UNIT .
SOFTWARE
VERSION
key. The available languages are Italian, French, Spanish, Portuguese,
LANGUAGE
Italiano
LANGUAGE
English
LANGUAGE
Italiano
USER CODE
YES
LANGUAGE
English
USER CODE
LANGUAGE
NO
Italiano
USER CODE
Enter code
LANGUAGE
YES
English
LCD CONTRAST
0
USER CODE
Code disabiled
NO
USER CODE
LCD CONTRAST Enter code
YES
15 ****
USER CODE
Code disabiled
LCD CONTRAST
NO
0
USB
STORAGE
YES=V / NO=X
LOAD
LCD CONTRAST
15
LCD CONTRAST
USB STORAGE
0
SAVE AS
YES=V / NO=X
LCD CONTRAST
USB
Enter USB
15
STORAGE
YES=V / NO=X
LOAD
SERIAL SPEED
115200 bps
USB STORAGE
Enter USB
SAVE AS
USB
YES=V / NO=X
Enter USB
STORAGE
YES=V / NO=X
LOAD
SERIAL SPEED
9600 bps
USB STORAGE
Enter USB
SAVE AS
YES=V / NO=X
SERIAL SPEED
SOFTWARE VERSION
115200 bps
version
SERIAL SPEED
SERIAL SPEED
9600 bps
Default Reset?
115200 bps
YES=V / NO=X
37
SOFTWARE VERSION
SERIAL SPEED
version
9600 bps
Italiano
Francais
To select
Espanol
Portuguese
Deutsch
English
Italiano
Francais
To select
Enter code Re-enter code
Espanol
**** ****
Portuguese
Deutsch
English
Code disabiled
Italiano
Francais
To select
Espanol
Portuguese
Deutsch
Re-enter code
English
**** ****
To select
Re-enter code
****
LOAD
To select
Enter USB
Press DOWN to
scroll down the
files
SAVE AS
Enter USB
Configuration1
To select
LOAD
Press DOWN to
scroll down the
files
9600 bps
19200 bps
To select
SAVE AS
38400 bps
LOAD
Configuration1
57600 bps (default value)
Press DOWN to
115200 bps
scroll down the
files
SAVE AS
Configuration1
9600 bps
19200 bps
To select
38400 bps
57600 bps (default value)
115200 bps
9600 bps
19200 bps
To select
38400 bps
57600 bps (default value)
115200 bps
LOAD
Configuration1
SAVE AS
Saving OK
LOAD
Configuration1
SAVE AS
Saving OK
LOAD
Configuration1
SAVE AS
Saving OK