Publicidad
Idiomas disponibles
Idiomas disponibles
7.- Tape player
8.- Auxiliary volume knob
9.- Microphone 2 volume knob
10.- Microphone 1 volume knob
11.- Stop / Eject buttons
12.- Backward / Forward buttons
INSTALLATION
Low impedance speaker output: 4ohms
4ohms end has been designed for connections with a few speakers in a
range of less than 50 meters.
The total impedance from the speaker must be the same as in the
amplifier output, for a better current distribution.
Make sure that the total impedance from the speakers are higher than 4
ohms.
Do not increase the output power from the amplifier more than
allowable by the speakers. Otherwise, may cause damages on the
speakers.
ENGLISH-07
Publicidad
