Descargar Imprimir esta página

STERWINS ST1 Instrucciones De Montaje, Utilización Y Mantenimiento página 193

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Recycling code of paper.
Please refer to the corresponding illustration at the end of the booklet.
3. TECHNICAL DATA
Model
Power (W)
Voltage (V)
Frequency
IP level
Protection class
Hose length
Minimum inlet flow rate
Maximum input temperature
Maximum inlet flow rate
Nominal pressure
Maximum pressure
Flow rate
Maximum flow rate
Sound power level
(Guaranted + Measured)
Sound pressure level
(Guaranted + Measured)
Vibration Level
(Guaranted + Measured)
Gross + Net Weight
The sound values have been determined according to noise test code given in EN 60335-2-79,
using the basic standards EN ISO 3744.
The sound intensity levels for the operator may exceed 85 dB(A) and ear protection measures
are necessary.
The noise figures quoted are emission levels and are not necessarily safe working levels. Factors
that influence the actual level of exposure of work-force include the characteristics of the work
room, the other sources of noise, etc. i.e. the number of machines and other adjacent processes,
and the length of time for which an operator is exposed to the noise. Also the permissible
exposure level can vary according to your country. This information, however, will enable the
user of the machine to make a better evaluation of the hazard and risk.
Guaranteed sound power level
(tested according to Directive
89
2000/14/EC as amended by
XX
2005/88/EC).
HPC STERWINS - EPW2-ST1.5
220-230 V ~
0.3 MPa
0.6 MPa
10.5 MPa
4.8 l/min
6.7 l/min
L
: 85 dB(A) + L
WA
K
WA
L
: 73 dB(A) + L
PA
K
PA
a
< 2.5 m/s², K=1.5 m/s²
h
6 kg + 5.2 kg
193
1500
50 Hz
IPX5
Class II
3m
40°C
7 MPa
: 85.1 dB(A)
WA
: 2.13 dB(A)
: 72.4 dB(A)
PA
: 3.0 dB(A)
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN

Publicidad

loading

Este manual también es adecuado para:

Epw2-st1.5