GE 26 Manual Del Propietario Y Instalación página 20

Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
[_] REMOVE THE REFRIGERATOR DOORS
r_ open the refrigerator doors.
r_ Removethe two caps with a flat-head screwdriver.
r_ Removethe three screws on top with a Phillips-head
screwdriver.
r_ Disengagethe two electrical connectors.
r_ To disconnect the water coupling, push in on the gray
color of the coupling and pull out the tubing.
[] Removethe two grounding cables with
Phillips-head a
screwdriver.
[] Removethree 10 mm hex-head bolts (right and left).
CAUTION:
When the bolts are removed,
the door may fall and cause personal injury and/or
damage to the door itself.
rsl REMOVE THE REFRIGERATOR
DOORS (cont.}
r_ Lift the door straight up to remove.
[]] Removethe two hex-head bolts and two Phillips-head
screws from the center hinge. Setthe hinge, bolts and
screw aside.
_ //_ ._-_
[_] REPLACING THEREFRIGERATOR DOORS
Installthe center hinge on each side.
Lower the refrigerator door onto the center hinge pin.
Ensurethat the plastic hinge pin thimble is on the center
hinge pin or insidedoor hinge pin hole located
in the bottom of the door.
r_ Securely tape the door shut with masking tape
or have a second person support the door.
20