Hilti ST 1800 Manual De Instrucciones página 20

Application
Sandwich panel to steel profile
Sandwich panel to steel beam
Sandwich panel to wood
3.4 Items supplied
Metal construction screwdriver, ST­DG 17 depth guage, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
4 Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
If the tool is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the tool. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the tool.
Weight
Speed (running under no load)
Max. torque
Chuck
Protection class
Operating temperature
Storage temperature
5 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
pA
Sound pressure level (L
Uncertainty
Vibration information
Triaxial vibration value
Uncertainty (K)
14 English
)
)
wA
Screw type
S­CD 63
S­CD 65
S­CDW 61
378502
Diameter Torque
in mm setting
5.5 2 - 7
5.5 2 - 9
6.5 5 - 8
ST 1800
1.9 kg
0 /min ... 1,900 /min
22 Nm
/ " hex socket
1
4
II
−10 ℃ ... 50 ℃
−30 ℃ ... 70 ℃
84 dB
95 dB
3 dB
2.5 m/s²
1.5 m/s²
*378502*