Beta 599DGT-A/20 Instrucciones página 19

TRACK MODE OPERATION
* Note 2
Current torque value
Current torque value
((...((...
Buzzer
((((((((
Buzzer
NB:
1. If appears, that means more than 110% of torque as stated in the specifications has
been applied to this wrench.
2. Set the angle value to
3. When 80% of the target torque value is reached, the green LED will start blinking, and an inter
mittent sound will be heard.
4. When 99.5% of the target torque value is reached, a continuous sound will be heard, and the
green LED will stop blinking and will remain on. The red LED will also turn on.
Start
(System initialization)
* Note 1
Set torque value
Applying torque
Reaching 80% of target torque
...))...)) ((...((...
80% of target torque reached
Reaching target torque
)))))))) (((((((
to enter the torque mode. The track mode is then effective.
* Note 3
...)) ...))
Green LED
* Note 4
)))))))
Red LED
Target torque reached
19