Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
Tool does nothing or
operates sluggishly
Tool jams frequently
LED LIGHT FUNCTIONS
TOOL STATUS
Normal
Low Battery
Jam Mode
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
For Warranty and Policy details, please go to powertools.ridgid.com
POSSIBLE CAUSE
Inadequate air pressure supply
Inadequate lubrication
Worn or damaged O-ring seals or bumper
Exposure to low temperatures
Exposure to high temperatures
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
LED LIGHT SCENARIO
Solid Green Light (No Flashes)
Solid Red Light (No Flashes)
Flashing Red Light
ILLUSTRATIONS START ON PAGE 15
as well as a Three-year Limited Warranty.
or call (toll free) 1-866-539-1710.
14 – English
SOLUTION
Verify adequate air supply. Add air
to the tool through the air fill valve.
Lubricate tool.
Contact authorized service center
for repair.
Allow tool to warm to proper operat-
ing temperature.
Allow tool to cool to proper operat-
ing temperature.
Verify that fasteners are the correct
size.
Replace fasteners.
Tighten screws.
Clean magazine.
Contact authorized service center
for repair.
ACTION REQUIRED
No Action Needed
Recharge or Replace Battery. If prob-
lem persists, contact an authorized
service center for repair.
Clear Jam – See Clearing a Jammed
Fastener in Operations.
Publicidad
