Uline H-8041 Manual Del Usuario página 10

OPERATING ISSUE
The machine leaves stripes of
wet floor.
The batteries do not provide
the nominal work time.
The battery discharges too
fast during use, even though it
has been charged correctly.
ERROR CODE DISPLAY
Brush Button LED:
2 quick flashes / pause / 2 quick flashes.
Brush Button LED: 1 flash / pause/ 1 flash.
Fan Button LED:
2 quick flashes / pause / 2 quick flashes.
Fan Button LED: 1 flash / pause / 1 flash.
Brush Button LED: + Fan Button LED, synchronized flash /
pause / synchronized flash.
Brush Button LED:
4 quick flashes / pause / 4 quick flashes.
Battery indicator yellow LED:
7 quick flashes / pause / 7 quick flashes.
Battery indicator yellow LED:
5 quick flashes / pause / 5 quick flashes.
PAGE 10 OF 31
TROUBLESHOOTING CONTINUED
CAUSES
Dust or debris on the floor is catching on
the squeegee blades.
Debris is trapped between the squeegee
blades.
The squeegee blades are worn.
The battery charger is not working.
The battery is new and does not deliver
100% of its expected capacity.
ERROR CODE
RECOMMENDATIONS
Sweep the floor prior to using the
machine.
Clean out debris from the
squeegee blades.
Replace the squeegee blades.
See battery charging instructions.
This is normal. New batteries
require a break-in period of
approximately 10 charging cycles.
Unplug unit and use as normal.
Charge after use.
ERROR
Brush short circuit error.
Overcurrent error.
Suction short circuit error.
Overcurrent error.
Electronic board
temperature error.
Brush thermal protector error.
Machine on with battery
charger powered error.
Excess battery voltage error.
0124 IH-8041