Descargar Imprimir esta página

Uline H-8041 Manual Del Usuario página 5

Ocultar thumbs Ver también para H-8041:

Publicidad

Idiomas disponibles

Idiomas disponibles

FILL TANK
1. Add water and detergent into the tank.
(See Figure 8)
Figure 8
NOTE: Use a low-foaming detergent with a
pH range between 7-11. Be sure to follow the
detergent instructions for proper dilution.
2. Open flow from detergent tank by pushing lever up
to horizontal position. Leave open. (See Figure 9)
Figure 9
BEGIN WORK
1.
Lower squeegee by pushing handle down.
(See Figure 10)
Figure 10
PAGE 5 OF 31
OPERATION
2. Turn on unit and press brush button. All lights will light
up and unit is fully functional.
(See Figures 11 and 12)
Figure 11
3. After use, empty the recovery tank by using the
attached drain hose. (See Figure 13)
Figure 13
4. Once finished, charge the battery.
NOTE: The battery should be charged after
every use. For optimal battery life, leave
plugged in when not in use.
WHEN FINISHED CLEANING
1. Turn machine off by pressing the On/Off button for at
least four seconds.
2. Raise squeegee.
3. Close the detergent tap.
4. Empty the recovery tank (see Maintenance).
5. Charge the battery (see Maintenance).
Figure 12
0124 IH-8041

Publicidad

loading