TP-Link TL-POE200 V2 Guia De Instalacion página 5

PoE Injector Only
Non-PoE Device
(switch, router, etc.)
PoE Splitter Only
PoE/PoE+ Switch
The PoE Injector supplies steady power and data connectivity to a powered device through
an Ethernet cable.
PoE Injector
LAN IN PWR
The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power
and data to a Non-PoE device.
PoE Splitter
LAN OUT
Power Socket
DC 48V
12V 9V 5V
Set the required voltage of the non-PoE
device before cable connection.
PWR DC OUT
3
Powered Device (PD)
IP Camera AP
Non-PoE Device
(suggested power:<10W)
English
IP Phone